User Interface: Aerosphère Base; Insert And Eject A Cd; Back Panel - G-Lab AeroSphère Small Features Manual

3. User Interface: AeroSphère Base

3.1. INSERT AND EJECT A CD

You can eject the CD with the following methods:
Hold your hand about 10 mm above the CD slot. The CD eject sensor is located above the CD slot. It detects
•
the hand with a proximity sensor.
Use the eject button on the remote control.
•
Use the eject icon in the AeroSphère app.
•
Figure 3: Hold your hand in the marked area for inserting and ejecting a CD.

3.2. BACK PANEL

Figure 4: Base panel, the status light is marked in red.
Status light
Color
yellow
green
green (slowly blinking)
green (fast blinking)
green (single blinking, repeating)
green (double blinking, repeating)
yellow / green / red (changing)
Back panel
Item
Power switch
Wi-Fi SETUP
Line-in connector
DC power input
Radio antenna connector
Status light
Status
AeroSphère Base is starting up, this takes about 20 seconds
Successfully connected to the Wi-Fi network and successfully
connected to at least one AeroSphère speaker
Successfully connected to the Wi-Fi network
In the process of connecting to the Wi-Fi network
Wi-Fi setup in progress (WPS method)
Wi-Fi setup in progress (network setup webpage method)
Software update in progress
Function
Power On / Off
Press WPS, then select button setup method
Hold for 10 seconds: Network webpage setup method
Analog audio input ( stereo ), 3.5 mm connector
Connect to the AC power adapter connector
Input for external FM / DAB antenna. F-Type connector.
Shows current status, see details below
7