Adjusting Image - Parrot OP0470 User Manual

AV Input

Adjusting image

1. Press F. Menu on the remote control to display the
on-screen menu. Press ▲▼ to select the icon for
image adjust. Then press ► or press Select.
2. Press ▲▼ to select the item to be adjusted, and
then press Select. At the time, the adjustment
dialogue box will appear. Press ◄►to set the
value.
Contrast
Press ◄ to decrease the contrast and press ►to increase
it.
Brightness
Press ◄ to decrease the brightness and press ►to
increase it.
Color
Press ◄ to decrease the color gamut and press ►to
increase it.
Tint
Press ◄► to select the appropriate tone for the image.
White balance (Red)
Press ◄ to make the red color lighter and press ►to
make it stronger.
White balance (Green)
Press ◄ to make the green color lighter and press ►to
make it stronger.
White balance (Blue)
Press ◄ to make the blue color lighter and press ►to
make it stronger.
Sharpness
Press ◄ to soften the image and press ► to sharpen it.
Gamma
Press ◄► to adjust the grey level to achieve better
contrast and balance.
Noise reduction
Enable this item to reduce the snow interference and
achieve more smooth and clear image.
Progressive
The interlaced video signal can be converted into images
in a progressive manner. You can select one from the
options below:
OFF: Disabled;
L1: Projecting dynamic image;
L2: Projecting still image;
Film: This item is used for watching films. When
it is selected, This projector
with high quality to reduce image distortion.
will restore the images
Image adjust menu
Contrast
Brightness
Color
Tint
Red
Green
Blue
Sharpness
Gamma
Noise reduction
Progressive
Exit
MENU
38
Image adjust
32
32
32
32
32
32
32
8
8
On
L1
Next
Move Next SELECT