Table of Contents
Advertisement
AV Input
Selecting AV system
1. Press F. Menu on the remote control to display
the on-screen menu. Press ▲▼ to select the
icon for input source. Then press ► or press
Select.
2. Press ▲▼ to select " Component " , " video "
or " S -video
" , and then press Select.
3. Press ▲▼ to select the system, and then press
► or press Select. Press ▲ ▼ to select the
signal format, then press Select.
Video or S-video.
Auto
The projector
can automatically detect the input video
s
ystem and optimize its own state. If the video
system is PAL-M or PAL-N, you should manually
select the system.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
The projector
if can't reproduce the image, you should
select a specific signal format from PAL, SECAM,
NTSC, NTSC 4.43, PAL-M and PAL-N.
Component
Auto
The projector
can automatically detect the input video
system and optimize its own state.
Component video signal format
The projector
If can't reproduce the image, you should
select a specific component video signal format
from 480i, 575i, 480p, 575p, 720p, 1035i and 1080i.
√
Note:
●
If SCART or HDMI is selected, AV system menu
will be disabled.
AV System Menu (Video or S-video)
HDMI
DVI
Computer 1
Computer 2
Component
S-video
Video 1
Video 2
RGBHV
SCART
System
Exit
MENU
AV System Menu (Component)
HDMI
DVI
Computer 1
Computer 2
Component
S-video
Video 1
Video 2
RGBHV
SCART
System
Exit
MENU
36
Input
Input
Move
Next
Next
SELECT
Input
Input
Move
Next
Next
SELECT
Advertisement
Table of Contents
