Advertisement
Using the Home Mode
The Receiver normally uses it's own unique input from GPS satellites to
compare the location of the RoamEO Collar on your dog, and its own
GPS location. However, if you want to have the Receiver remember a
location such as a house, vehicle, or campsite, use this procedure to
store that location and RoamEO will guide you to it.
Top Button Function
Top
Button/Power:
turns the unit on
and off; holding the
Top Button down
for 2 seconds turns
the Receiver off.
Pressing the Top
Button will also turn
on the backlighting
for 30 seconds.
Icons
The distance
indicator, up to five
digits, contains either
dashes if there is not
a GPS lock on the
selected collar and
the handheld (when
not in Home Mode).
To establish a
Home Mode GPS
location, take your
Receiver outside.
1
Press and hold
the bottom button
until the house
outline and house
interior alternatively
flash. Release the
button; the Receiver
will automatically
search for an
accurate GPS fix.
Middle
Button/Collar
selection and
registration
:
pressing the Middle
Button selects
between locating
Dog #1 and Dog #2
(if two collars are
registered). Press-
ing and holding the
Middle Button
begins the collar
registration
process.
The selected collar
The collar radio
indicators: The little
indicator: Illuminated
number circles when
when a radio packet
the collar is not
from the selected
enrolled. When the
collar is received. Will
RoamEO Collar is
stop displaying after
enrolled, the paws
90 seconds if another
are illuminated
packet is not
around the numbered
received within
circles.
that period.
1
Middle Button Function
The collar battery
The collar GPS
level Icon: Shows
Icon: Illuminated
when the collar has
the battery level of
the selected collar.
a GPS lock. Will
The battery outline
show only when
validGPS lock is
indicates battery
information is avail-
received within the
able: 4 bars (full) to
last 90 seconds.
0 bars (empty).
The distance
display will show
GPS accuracy (e.g.
"acc50") and will
likely improve over
a short time.
When the GPS
accuracy is down
to 15ft or less (e.g.
"acc15"), the
receiver will now
automatically go
into Indoor Mode.
1
Toggling the
bottom button will
turn the Home
1
Mode on and off.
Bottom Button Function
Bottom
Button/Home
Mode:
Pressing
the Bottom Button
turns the Home
Mode on and off.
Pressing and
holding the Bottom
Button outside with
a good GPS lock
(under 15ft) will
establish the Home
Mode GPS location.
Receiver battery
Indoor Mode Icon:
level Icon:
Home outline
Shows the battery
indicates a home
level of the handheld
location has been
unit. The battery
saved. If the interior
outline indicates that
is also illuminated,
battery information is
then the handheld is
available: 4 bars (full)
in home mode.
to 0 bars (empty).
Receiver GPS Icon:
Illuminated when
the collar has a GPS
lock. Will show only
when GPS lock is
received within the
last 90 seconds.
Advertisement
