Setup Description - Sony Bravia DMX-WLl Startup Manual

Use the Setup menu to change the Language or IR Blaster settings.
1
Press SETUP to display the Setup menu.
2
Press +/+/+/+ to highlight an item, and press
8
to confirm.
3
Press SETUP to exit.
Setup Description
Set up the IR Blaster to control external equipment connected to the transmitter unit with the supplied
remote control. For details, see the supplied Startup Guide.
•
Category
Maker
Code
Test (Power On/Off)
Save and Exit
Select the category from Cable Box, Satellite, VCR, DVD, BD
or
Receiver.
Select the manufacturer of your equipment from the list.
Select Enter code... to enter codes for equipment not listed (for code list, see page 15).
Select the code from the list (see page 15).
p
• For Sony products, most of the codes appear as text.
Check that the code is correct by powering on or off the equipment attached to the selected
input.
p
• If the equipment's supplied remote control has both a POWER ON and a POWER OFF
button, the Test Power (On/Off) function might not work to test the IR code.
Select Save and Exit, then test if any other remote buttons will operate your
equipment:
Save the setting and exit the Setup menu.
13