ENVIRONMENTAL SPECIFICATIONS
Temperature
Operating
Storage
Humidity
Thermal Load
SEI-250
SEI-500
SEI-750
Always insure that the person assigned to the job can perform the job safely.
Always lift all equipment properly.
Always disconnect commercial power and remove the battery fuse before working
on the unit.
Always replace the batteries with batteries of the same type and style.
DO NOT work on this equipment during an electrical storm.
DO NOT work in locations where there is condensing moisture or standing water.
Service to the DC UPS should be performed by a qualified technician.
0 °C to +40 °C
-20 °C to +50 °C
0-95% non-condensing
190 BTU/hr max
380 BTU/hr max
570 BTU/hr max
SAFETY INFORMATION
4