Do not cove r the unit or block ventilation inle ts. The Access 211N Gate way must be powe re d by an exte rnal UL liste d limite d powe r source or Class II powe r source (AC/DC adapte r), rate d input: 100 -240 V, 47-63Hz , 0.5A, output: 5VDC @ 2A.
Page 2
To install your Access 211N VoIP Gateway with a single PC: Unpack the Access 211N Gateway unit. Place the Gateway on a desktop or other level surface, or mount it on a wall. Choose a location that is near the devices to be connected and close to an electrical outlet.
Page 3
12. Pick up the phone on each line to verify that you can hear the dial tone. Once the installation is complete, you can use your Access 211N Gateway for telephone calls and for the Internet, assuming that you have a connection supplied by your VoIP provider.
Page 4
Access 211N VoIP Gateway (AC-211N) User Guide. Once the installation is complete, you can use your Access 211N Gateway for telephone calls and for the Internet, assuming that you have a connection supplied by your VoIP provider.
Need help?
Do you have a question about the Access 211N and is the answer not in the manual?
Questions and answers