Advertisement
LED Indication
Flashing LED light
Steadily Lighted
Please go through the troubleshooting steps below if there is no sound coming out of
your speakers/devices.
◎ Make sure the BTR-100 is turned on.
◎ Make sure an audio cable or an optical cable is correctly and firmly connected to
your BTR-100 and your audio device/home stereo system.
◎ Make sure that the audio source is correctly selected on your amplifier (analog audio
or TOSLINK)
◎ Make sure the volume is set at a comfortable listening level
◎ Make sure you are within the effective range of reception.
◎ Make sure the Bluetooth is turned on your source device.
◎ Make sure the music is playing from the mobile device.
◎ Keep BTR-100 away from water.
◎ Clean with dry cloth.
◎ Unplug the BTR-100 before cleaning.
◎ Place BTR-100 away from heat sources.
◎ Use only the included accessories.
◎ Unplug the BTR-100 when it is not used..
®
***aptX
software is copyrighted by CSR plc or its group companies. All rights reserved.
®
The aptX
mark and the aptX logo are trademarks of CSR plc or one of its group
companies and may be registered in one or more jurisdictions.
Indication of LED
Status
Power on ready for pairing
Connected
Troubleshooting
SAFETY WARNINGS
7
Description
Waiting for connection
Connection established
Advertisement
