Advertisement
PREPARATIONS
Wiring Diagram
Antenna
Purple
Purple/
Gray
Gray/
White/
Black
Black
Stripe
Stripe
Using the ISO Connector
1.If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.
2. For connections without the ISO connectors, check the wiring in the vehicle carefully
incorrect connection may cause serious damage to this unit.
Cut the connector, connect the colored leads of the power cord to the car battery,
code table below for speaker and power cable connections
ISO Connector
Yellow
To car battery(+) Continuous +12V DC
Black
Ground Lead
Blue
Motor/Electric Antenna relay control Lead
Amplifier relay control Lead
Red
Ignition key
+12V DC When ON/ACC
White
Green/
Green
Black
Black
Stripe
Stripe
Connector
ACC+/red
Auto Antenna/blue
Battery 12V (+)/yellow
Ground/black
1-6
Connector
Connector
Rear Right(+)---Purple
Rear Right(-)---Purple/Black Stripe
Front Right(+)---Gray
Front Right(-)---Gray/Black Stripe
Front Left(+)---White
Front Left((-)---White/Black Stripe
Rear Left(+)---Green
Rear Left(-)---Green/Black Stripe
Fuse 15A
Line-out (Gray)
For some VW /Audi or Opel(Vaux hall)
car models, you may need to modify
w iring of the supplied power cord as
illustrated, or else th e memory of the
uni t may be lost after you power off.
Cont act your authori zed car dea ler
before i nsta lling this unit .
Ori ginal wi ring
Yellow
Red
Modified wir ing
Yellow
Red
before connecting,
as shown in the colour
A mplifier
R(Red)
L(White)
Yellow
Red
Yellow
Red
Advertisement
