50
Operating
Other operations
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [DRC ON] by using
DRC.
AV Sync
When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
1. Press AV SYNC.
3
2. Use C/V to scroll up and down through
the delay amount, which you can set at
anything between 0 and 300 ms.
Turn off the sound temporarily
Press
(Mute) to mute your unit.
You can mute your unit, for example, to answer
the telephone, "MUTE" is displayed in the display
window.
To cancel it, press
control or change the volume level.
(Mute) again on the remote
Displaying input source
information
You can display various information of the input
source by pressing INFO.
OPTICAL/HDMI IN/PORTABLE : Audio format, Audio
channel
Sleep timer setting
This unit will turn off by itself after the time set.
Press SLEEP one or more times to select delay time
between 10 and 180 minutes.
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP
repeatedly until "SLEEP 10" appears, and then press
SLEEP once again while "SLEEP 10" is displayed.
,
Note
You can check the remaining time before the
unit turns off . Press SLEEP the remaining time
appears in the display window.
Auto power down
This unit will be off itself to save electric
consumption in the case main unit is not
connected to external device and is not used for 20
minutes.
So does this unit after six hours since Main unit
has been connected to other device using analog
input.