Programming The Trunk Access Digit - Opera 4 IP System Manual

Opera 4 IP System Manual
3.7.

Programming the Trunk Access digit

The trunk line access digit is the digit dialled by a user to make a call on an external trunk. In
addition to the default trunk line access code there are eight other codes that may be allocated
to the various external lines using the table below.
Trunk Access Codes
In the example shown below, IP1 to IP4 are SIP trunks and A5 is an analogue PSTN trunk line.
Dialling the digit 0 will select any trunk line.
Dialling *91 will select the SIP trunk line IP1.
Dialling *92 will select the SIP trunk line IP2.
Dialling *93 will select the SIP trunk line IP3.
Dialling *94 will select the SIP trunk line IP4.
Dialling *95 will select the analogue PSTN trunk line A5.
Page 27