Firmware Update Procedures - Supero AOC-UIBF-m1 User Manual

Installing 10G Drivers for the Windows Operating System
1. From the CDR-NIC LAN driver CD or FTP site, go to the following directory:
Mellanox > ConnectX_EN > Windows.
2. Choose the desired 10G Windows driver package file.
3. Double-click to run and install the driver package file.

Firmware Update Procedures

Use the following procedures for updating the AOC-UIBF-m1 add-on card firmware
for both the Linux and Windows operating systems.
Updating Firmware for the Linux Operating System
1. From the CDR-NIC LAN driver CD or FTP site, go to the following directory:
Mellanox > Firmware_Tool > Linux.
2. Choose the MFT Linux package file and untar the package file.
3. Install the package by entering the following command:
cd mft–<ver>
./install.sh
4. Install the firmware by the following commands:
mst start
mst status
flint –d <pci_cr0 device name> –i <firmware file name>.bin b
Updating Firmware for the Windows Operating System
1. From the CDR-NIC LAN driver CD or FTP site, go to the following directory:
Mellanox > Firmware_Tool > Windows
2. Choose the desired MFT Windows package file.
3. Double-click to run and install the MFT package file.
*write down the pci_cr0 device name*
3-5
Chapter 3: Installation