Figures and Quick Guide Product Layout / Description du produit / Esquema del producto Camera / Caméra / Cámara / Kamera / Telecamera Fig. 1 Monitor / Moniteur 12 13 14 15 16 Fig. 2...
Page 3
Setup / Installation / Configuración / Einrichtung / Installazione Camera Setup / Installation de la caméra / Configuración de la cámara Power Supply - Using AC Power Fig. 3...
Page 4
Monitor Setup / Installation du moniteur / Configuración del monitor Power Supply / Alimentation / Fuente de alimentación / Stromversorgung Loading the Battery / Installation de la batterie / Insertar las pilas Fig. 4 Using AC Power /Utilisation de l'alimentation secteur Fig.
Page 5
Monitor Remote Control Function Tilt Fig. 6 Zoom in Function Fig. 7 VOX (Voice-Operated Transmission) Function Fig. 8...
Page 6
Volume Setting / Réglage du volume / Configuración del volumen Fig. 9 Talkback Function / Fonction de réponse / Función de intercomunicador Fig. 10...
Page 7
Menu Options / Options du menu / Opciones del menú Fig. 11 Camera Selection / Sélection de la caméra / Selección de la cámara Fig. 12 Feed Timer Setting Fig. 13...
Page 8
Temperature Setting / Réglage de la température Fig. 14 Camera Setting Fig. 15 Brightness Setting / Réglage de la luminosité / Configuración del brillo Fig. 16...
Package Content One Camera One Monitor Two Power Adapters Battery for Monitor ( 3.7V 1100mAH Li-ion ) This User's Manual Product Layout Camera (Fig. 1) Light sensor Microphone Lens Infrared LEDs Speaker Power adapter plug Power/Pairing button Antenna Temperature sensor 10.
Setup Camera Setup ower Supply - Using AC Power 1. Plug one end of the provided power adapter into a wall outlet and the other end into the back of the camera. See Fig. 3. Note : Use the adapter labeled OUTPUT: 6V DC with the camera. 2.
Page 13
Using AC Power Plug one end of the provided power adapter into a wall outlet and the other end into the monitor. See Fig. 5. Note : Use the adapter labeled OUTPUT: 6V DC with the monitor. 2. Press the POWER button and keep it around 3 seconds to turn the monitor on.
Menu Options 1. Press the menu button on the monitor unit to display the main menu on the screen. See Fig. 11. 2. Use the left and right buttons to navigate through the menu. 3. Press the Zoom/OK button to confirm a setting. 4.
VOX Sensitivity ( VOX Sensitivity ) This submenu lets you choose the VOX (voice activation) sensitivity level. When the level set to high, the screen will turn on by lower sounds. See Fig. 17. Status Information The status bar will be displayed on the top of the screen. See Fig. 18. 1.
Troubleshooting You don't getting any signal at all Ÿ Make sure the camera and the monitor are turned on. Ÿ Make sure the power plugs are pushed all the way in. If the signal is poor, or there is interference Ÿ...
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Following the safety tips To prevent deaths and injuries associated with baby monitor cords : Make sure the baby unit and AC adapter cords are always out of reach of the Ÿ baby at least 3 feet (1 meter) away. Note : It's important even if your baby is not yet standing or mobile.
Need help?
Do you have a question about the VM2501 and is the answer not in the manual?
Questions and answers