Using Bluetooth Technology; Listening To Music Stored On The Bluetooth Devices - LG SoundPlate LAP340 Owner's Manual

Auto power down
This unit will turn itself off to save electric
consumption in the case were main unit is not
connected to external device and is not used for
25 minutes.
Using Bluetooth
technology
About Bluetooth
Bluetooth is wireless communication technology
for short range connection.
The sound may be interrupted when there is
interference by the other electronic waves which
run on same frequency or if you connect bluetooth
devices in the other rooms nearby.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges. A
mobile phone with Bluetooth® wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA etc.
Bluetooth profiles
In order to use Bluetooth® wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
LAP340-NB_DARELLK_ENG.indd 15
Listening to music stored on
the Bluetooth devices
Pairing this unit and Bluetooth
device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device's
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by using h on
the remote control. Then the orange LED on the
unit starts to blink.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as "LG SOUND PLATE
(XX:XX)".
,
Note
y XX:XX means the last four digits of BT
address. For example, if your unit has a
BT address such as 9C:02:98:4A:F7:08,
you will see "LG SOUND PLATE (F7:08)" on
your Bluetooth device.
y Depending on the Bluetooth device type,
some device have a different pairing way.
Enter the PIN code (0000) as needed.
3. The orange LED is lit up for about 3 seconds
when this unit successfully paired with your
Bluetooth device.
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device's user guide.
Operating 15
2
2013-10-30 9:11:56