Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for IOGear IOGEAR GUWAVKIT2
Summary of Contents for IOGear IOGEAR GUWAVKIT2
-
Page 1: Quick Start Guide
Quick Start Guide Wireless HD Computer to TV Kit GUWAVKIT2 PART NO. Q1142-b... -
Page 4: Transmitter Installation
Transmitter Installation 1. Plug the Wireless USB Transmitter to a USB 2.0 port on your computer (the tray icon will change from Gray to Red 2. Please keep the Transmitter in upright position only. -
Page 5: Receiver Installation
Receiver Installation 1. Depending on your installation application, slide the shutter to show the USB port. 2. Insert the Device Adapter. 3. Keep Device Adapter in upright position only. Tabletop Wall Mounting... -
Page 6: Cords And Cables
Cords and Cables 1. Connect the A / V Base using the HDMI cable or a combination of VGA and audio (3.5mm) cables (sold separately). 2. Slide in the prong changer to the AC adapter first. Connect the power cable to the Black port. - Page 7 Configuration 1. Keep your Wireless Transmitter & Receiver at Max 30 ft. within line-of-sight. 2. Now you should be able to watch the same content as your laptop’s screen on your HDTV - Mirror mode is set as default. 3. In Mirror Mode, the screen resolution is chosen automatically for both the laptop and the HDTV.
-
Page 8: Troubleshooting
Troubleshooting General Troubleshooting Minor issues can generally be resolved by checking the following: • Make sure that the TV was set on the correct “Input” source, such “HDMI 1” • Detach and reattach the transmitter from your computer’s USB port, wait for the connection to re-establish (may take a few seconds) •... - Page 9 Troubleshooting Video Playback Under the display icon in the tray • If available it is recommended to use “Optimize for Video” • Use “Extended Mode”, and limit the extended screen resolution to 720p (1280 x 720) Online Video streaming: Windows XP •...
-
Page 10: Federal Communications Commission (Fcc) Statement
Federal Communications Commission (FCC) Statement This product has been tested and found to comply with the limits for a Class B device, pursuant to part 15 of the FCC Rules. It is intended for use in residential setting, but may also be used in commercial or industrial setting. - Page 11 A / V Base Mounting Template For your convenience, you may use this drill template for easy marking of hole positions for mounting the A / V base. Please make sure the chosen screws / fixtures are suitable for use in the wall to which they are to be attached.
Need help?
Do you have a question about the IOGEAR GUWAVKIT2 and is the answer not in the manual?
Questions and answers