Ir Remote Control; Hardware Installation - Ace Plus EX-G052 User Manual

ACE PLUS CORP.

IR Remote Control

Hardware Installation

1. Connect VGA/component/s-video/composite display/projector to the output of EX-G052.
2. Connect the VGA/component/s-video/composite source devices to the inputs of EX-G052.
3. Plug power adapter cable into 5V DC power jack.
4. Use IR remote or push button on the front panel to switch between inputs, or connect a computer
through RS-232 port to switch the VGA/component/s-video/composite input sources.
Page 6 of 8
: IDLE : To the right
: Reserved : Channel 1
: Reserved : Channel 2
: Reserved : Channel 3
: To the left
: Channel 4
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: +886-2-2912-4201
FAX: +886-2-2912-3164
Website: www.ace-plus.com
: Reserved
: Reserved
: Reserved
: Reserved