Ace Plus EX-G052 User Manual

8x1 vga/component/s-video/composite switch with audio

Advertisement

Quick Links

ACE PLUS CORP.
EX-G052
8x1 VGA/Component/S-Video/Composite
Switch with Audio

User Manual

Page 1 of 8
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: +886-2-2912-4201
FAX: +886-2-2912-3164
Website:
www.ace-plus.com

Advertisement

Table of Contents
loading

Summary of Contents for Ace Plus EX-G052

  • Page 1: User Manual

    ACE PLUS CORP. EX-G052 8x1 VGA/Component/S-Video/Composite Switch with Audio User Manual Page 1 of 8 Headquarters : 9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian, Taipei, Taiwan 231 TEL: +886-2-2912-4201 FAX: +886-2-2912-3164 Website: www.ace-plus.com...
  • Page 2: Safety And Notice

    However, like all electronic equipments, EX-G052 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
  • Page 3 PC graphics and HDTV videos with crystal clear audio in the market. With equipped audio switch, EX-G052 is ready to be as a switch with stereo audio and ideally for boardroom, showroom, and exhibition. The control of EX-G052 is versatile and easier through the IR remote control, the push button on front panel, or the RS-232 control on rear panel.
  • Page 4: Specifications & Package Contents

    ACE PLUS CORP. Specifications & Package Contents Model Name EX-G052 Technical Role of usage 8x1 switch Supported input/output VGA / Component / S-video / Composite Video bandwidth 350MHz 1080p60, WUXGA [1920x1200@60] & UXGA [1600x1200@60] or Video support even higher Transmission HD [720p/1080i] –...
  • Page 5: Panel Descriptions

    ACE PLUS CORP. Panel Descriptions Front Panel 1. Push button for input switch 4. LED indicator for VGA input #1 8. LED indicator for VGA input 2. Infrared sensor 5. LED indicator for VGA input #2 9. LED indicator for VGA input 3.
  • Page 6: Ir Remote Control

    Hardware Installation 1. Connect VGA/component/s-video/composite display/projector to the output of EX-G052. 2. Connect the VGA/component/s-video/composite source devices to the inputs of EX-G052. 3. Plug power adapter cable into 5V DC power jack. 4. Use IR remote or push button on the front panel to switch between inputs, or connect a computer through RS-232 port to switch the VGA/component/s-video/composite input sources.
  • Page 7: Pin Definition

    ACE PLUS CORP. Pin Definition Pin 1 Pr / Red Pin 9 +5 V 5 4 3 2 1 Pin 2 Y / Green / Composite Pin 10 Ground Pin 3 Pb / Blue Pin 11 Ground Pin 4 Ground...
  • Page 8: Limited Warranty

    The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the EX-G052 features and specifications is subject to change without further notice.

Table of Contents