Advertisement
Quick Links
Advertisement
Related Manuals for MSL JET PLUS 400
Summary of Contents for MSL JET PLUS 400
- Page 1 MSL JET PLUS 400/500 Unpacking and Set-Up Guide...
- Page 2 If you are unsure what type of phone line you have, most fax machines use an analog line. Step 1 Step 2 Open the JET PLUS 400 or JET PLUS 500 carton and remove the Open the optional JET PLUS 400/500 Feeder or WP05 weigh contents platform cartons and remove the contents.
- Page 3 Attach Optional Autofeed Unit 1) Press on tab with thumb then push up. If you received an optional MSL JET PLUS 400/500 Autofeed, you must first attach the Infill Unit. Place the Infill Unit on the table then 2) Pull down slightly then connect the infill to the handfeed...
- Page 4 With the Autofeed or Handfeed Platform in the desired position on on the table adjacent to the mailing machine if this is preferred. the table, lower the MSL JET PLUS 400/500 into place so that the Position the weigh platform on its support. Excess cable can slots fit over the tabs as illustrated.
- Page 5 Step 7 Fill the Label Dispenser A package of postage labels is included with your MSL JET PLUS 400/500 mail machine. The label dispenser will hold up to 50 labels. Open the top cover to access the BLUE label release lever.
- Page 6 MSL JET PLUS 400/500 Unpacking and Set-Up Guide UNBOX AND SET-UP (CONTINUED) Machine Connections to Weigh Platform Do not plug the power cord into the machine until all the other connections have been made Step 9 Step 8 Connect optional EasyWeigh Platform to MSL JET PLUS Connect optional WP5 2Kgm Weigh Platform to MSL JET 400/500 Base Mailing Machine –...
- Page 7 Do not plug the power cord into the machine until all the other connections have been made Step 10 Step 11 Connect optional Autofeed to MSL JET PLUS 400/500 Base Connect optional Mail Accounting PC MSL JET PLUS 400/500 Mailing Machine...
- Page 8 Power Cord Telephone Cable Important After you plug the power cord into the MSL JET PLUS 400/500, it will beep and display “PLEASE WAIT” while it goes through a power-up sequence. When it displays: Note: the telephone connection is only required when adding...
- Page 9 ‘click’ into place. 2. The MSL JET PLUS 400/500 mailing machine must be plugged in and displaying to install the Ink Cartridge.
- Page 10 YOU ARE NOW READY TO USE YOUR MAILING MACHINE 3. Use the numeric key pad to enter the four digit CREDIFONPIN and For more details on using MSL JET PLUS 400/500 mailing then select the amount of postage you wish to purchase Machine, please refer to your User Guide.
Need help?
Do you have a question about the JET PLUS 400 and is the answer not in the manual?
Questions and answers