Cadillac 2014 SRX Owner's Manual page 61

Storing Memory Positions
To save positions to the 1 and 2
buttons:
1. Adjust the driver seat, seatback
recliner, both outside mirrors,
and adjustable pedals (if
equipped) to the desired driving
positions.
2. Press and hold MEM (Memory)
and 1 at the same time until a
beep sounds.
3. Repeat Steps 1 and 2 for a
second driver using 2.
Manually Recalling Memory
Positions
If the vehicle is OFF or not in
P (Park), press and hold "1" or "2"
to manually recall the previously
stored memory positions. Releasing
"1 or "2" before the stored positions
are reached stops the recall.
If the vehicle is ON and in P (Park),
press and release 1 or 2 to
manually recall the previously
stored memory positions. Placing
the ignition in OFF before the stored
positions are reached stops the
recall.
If something has blocked the driver
seat and/or the adjustable pedals
while recalling a memory position,
the recall may stop. Remove the
obstruction; then press and hold the
appropriate manual control for the
memory item that is not recalling for
two seconds. Try recalling the
memory position again by pressing
the appropriate memory button.
If the memory position is still not
recalling, see your dealer for
service.
Automatically Recalling Memory
Positions (Auto Memory Recall)
The Auto (Automatic) Memory
Recall feature automatically recalls
the current driver s previously stored
1 or 2 position when entering the
vehicle.
Seats and Restraints
Depending upon the Auto Memory
Recall feature enabled in the vehicle
personalization menu, memory 1
or 2 positions are recalled in the
following ways:
To activate the recall when On -
Driver Door Open is selected in the
vehicle personalization menu:
On vehicles with RKE, press
on the RKE transmitter and open
the door.
On vehicles with Keyless
Access, press the lock/unlock
button on the outside driver door
handle and open the driver door.
The RKE transmitter must be
present for the recall to activate.
If the driver door is already
open, press on the RKE
transmitter to activate the recall.
To activate the recall when On - At
Ignition On is selected in the vehicle
personalization menu:
Place the ignition in ON/RUN/
START.
3-7