Table of Contents
Advertisement
Quick Links
X-FIRE 1200
USER GUIDE
GB / IE EDITION
LEAVE WITH USER
DISTRIBUTED BY
Acquisitions of London
24-26 Holmes Road
London Nw5 3AB
Tel: 24 hours 004 (0)207 482 2949
Email: sales@acquisitions.co.uk
This appliance is suitable for use on Natural gas (G20) at a
supply pressure of 20 mbar or Propane (G31) at a supply
pressure of 37 mbar
630142_1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Acquisitions X-FIRE 1200
Summary of Contents for Acquisitions X-FIRE 1200
- Page 1 X-FIRE 1200 USER GUIDE GB / IE EDITION LEAVE WITH USER DISTRIBUTED BY Acquisitions of London 24-26 Holmes Road London Nw5 3AB Tel: 24 hours 004 (0)207 482 2949 Email: sales@acquisitions.co.uk This appliance is suitable for use on Natural gas (G20) at a...
- Page 2 To access this, the fascia must be removed. We recommend that the X-FIRE 1200 is inspected and serviced by a qualified Gas Fitter once every twelve (12) months.
-
Page 3: Table Of Contents
Contents > Basic Operation Turning the X-FIRE 1200 on Setting the Control Mode Locking the Remote Control Operation from the touch pad Clearances > > Cleaning and Maintenance > Normal operating Sounds and Smells > Warranty Information X-FIRE 1200... -
Page 4: Basic Operation
Basic Operation The X-FIRE 1200 remote control allows you to turn ON and OFF the fire, control the flame height in the Manual mode, or control the room temperature in the Thermostat mode. The remote has a maximum range of 10 meters, and... -
Page 5: Setting The Control Mode
Basic Operation Switching off the X-FIRE 1200 To turn off the fire, push the OFF button, to shut down the gas flow to the fire and switch it off. The OFF display will now appear in the display. Setting the control mode for the fireplace: There are three different modes for controlling the appliance: >... - Page 6 In this mode the main burner can be switched on and off (pilot still burning). → → Day programming menu: (Menu Adjust Menu Change Program) There are 8 menus like this. One for Daily, and the others for each separate day (Monday, Tuesday, Wednesday, Thursday, Friday, Saturday and Sunday). (Continued next page) X-FIRE 1200...
- Page 7 Off, Night, or Comfort. The pilot must remain lit in order for the program to remain running. Changing the display from Celsius to Fahrenheit: → → Go into Menu Adjust menu Unit. Press middle button and then left button for changing units. X-FIRE 1200...
-
Page 8: Locking The Remote Control
LED will begin to blink and the unit will emit a beep. DO NOT DROP THE REMOTE. Dropping the remote may result in a cracked LCD screen or malfunctioning components. The warranty does not cover damage to the remote sustained by dropping, however replacement remote controls are available. X-FIRE 1200... -
Page 9: Clearances
TV location decisions rest solely with the householder and the manufacturer / distributor will not be held liable for any adverse affects on a TV located near to the X-FIRE 1200 fireplace that may be caused by heat. The drawings below are suggestions that may be used as a GUIDE for those consumers who do decide to locate their TV above an X- FIRE 1200 gas fire. - Page 10 When batteries are replaced in either the battery box (inside the fireplace) or n the handset, the unit will require 1 minute afterwards to regain connection. X-FIRE 1200 Mantle Clearances If any part of the installation (mantle, wall If the entire installation (mantle, wall and...
-
Page 11: Cleaning And Maintenance
Fascia Ensure the fascia is allowed to cool before handling. The X-FIRE 1200 fascia attaches to the fire by four hooks. To remove the fascia, simply lift it upwards 15-20mm, and pull towards you. Care should always be taken when handling the fascia. - Page 12 Do not operate the appliance if the glass has been broken, damaged, or the glass is not properly positioned/hooked onto the appliance. Cleaning your X-FIRE 1200 The unit must be cold before starting any form of maintenance or cleaning. The glass can be cleaned using standard window cleaner. If you wish the clean the inside of the glass, you can remove the glass assembly by following the instructions on page 8.
-
Page 13: Normal Operating Sounds And Smells
This is a temporary curing process which will disappear with use. X-FIRE 1200... -
Page 14: Warranty Information
Product that is deemed at fault will be the responsibility of the retailer or Acquisitions Fireplaces Limited. For the second period of twelve (12) months from the... - Page 15 Limited Warranty is void in relation to any part of the product, which has been modified. Acquisitions must be notified of all claims under this Limited Warranty as soon as possible, but in any event not later than two (2) weeks of the claimant becoming aware of the circumstance giving rise to the claims.
Need help?
Do you have a question about the X-FIRE 1200 and is the answer not in the manual?
Questions and answers