E-Mu proteus 2000 Basic Operations page 8

Channel Pan
28 E-mu Systems
Channel Pan sets the stereo position of the selected MIDI channel. This
control operates like the balance control on your home stereo system.
Channel Pan is the same parameter as MIDI pan controller #10, and
changes made over MIDI are shown in the display.
C01A
2
032
Note: Pan settings in the preset ADD algebraically with the Channel Pan
setting. Therefore, if the pan setting in the preset were set to "63
the Channel Pan setting full left would return the sound to the center
position.
To Change the Channel Pan
Press either cursor key until the cursor is underneath the pan field.
1.
Rotate the Data Entry Control to select a pan value. 64
2.
left pan, 63 indicates a hard right pan. With a setting of "00," the
R
sound is centered in the stereo field.
Pan Position
Vol127 Pan01
bas: Interference
Basic Operations
Main Screen
USER
R
," moving
R
indicates a hard
L