Advertisement
Quick Links
DP30/C
DP30/C
Frequency response
30Hz to 30kHz +2dB@1'
Polar Pattern Cardioid
1
Sensitivity
0mV/Pa (-40dBV/Pa)
Power requirements
48V Phantom,
1
Peak acoustic input
45dB SPL
Output
XLR (PIN 2+)
600Ω, balanced
Minimum output load
between pins 2&3
Noise 22dB SPL (A weighted)
1
0.75 x .860 inches
Dimensions L x D
(275mm x 22mm)
1
Weight
.22lb (
Made in U.S.A.
Earthworks, Inc.
37 Wilton Rd.
Milford, NH 03055
603-654-6427, ext. 14
www.earthworksaudio.com
Printed in U.S.A.
1
0mA
00g)
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Earthworks CloseMic CMK4
Summary of Contents for Earthworks CloseMic CMK4
- Page 1 2&3 Noise 22dB SPL (A weighted) 0.75 x .860 inches Dimensions L x D (275mm x 22mm) Weight .22lb ( 00g) Made in U.S.A. Earthworks, Inc. 37 Wilton Rd. Milford, NH 03055 603-654-6427, ext. 14 www.earthworksaudio.com Printed in U.S.A.
- Page 3 NOTES Congratulations on your purchase of an Earthworks CMK4 or CMK5 CloseMic™ Kit System. You will be thrilled with the results you will be able to obtain using the CloseMic™ Kit System. After reading this manu- al, if you have any unanswered questions, please email or phone us using the contact information on the back page of this manual.
- Page 4 Earthworks High Definition Microphones™. toms with DP30/C Microphones. We know that when you use the Earthworks High Definition Drum Periscope Microphones for your recording and live performances you will be thrilled with the results. We are pleased to welcome you to the ever-growing family of professionals using Earthworks High Definition Microphones™.
- Page 5 suggested that the microphone head be positioned between 1.5 inches and of the mic line, or by plugging the LevelPad directly into the preamplifier 3 inches above the drumhead. input. The most popular practice is to plug the LevelPad™ into the pre- All of the previous information in this manual applies to both toms and amplifier input, which makes it more accessible to switch the attenuation snares when using a Drum Periscope Microphone.
- Page 6 David Blackmer, the brilliant engineer who invented the unique technolo- pages 3 and 4 of this manual. gies of dbx, is also the inventor and founder of Earthworks. In the last few Close Miking Snare Drums with the DP30/C years of his life, David developed a number of revolutionary technologies As previously mentioned, when close miking drums with a DP30/C micro- that dramatically improve the quality and performance of microphones.
- Page 7 The various types of metal drum rims may have the bottom flange of the polar technologies. Those who have heard Earthworks High Definition rim either closer to the shell or further from the shell. Depending upon Microphones™, say that they hear more of the attack, and more subtle...
- Page 8 RimMount to the drum rim is quite easy. First, unscrew the thumbscrew In contrast, Earthworks has a patented polar technology that provides so there is more than enough space for the Delrin® cushioned rim-guide our microphones with the same frequency response on the sides of the mi- to clear the bottom of the drum rim.
Need help?
Do you have a question about the CloseMic CMK4 and is the answer not in the manual?
Questions and answers