6. Mechanical adjustment
6.2
ADF Leading Edge Skew Adjustment
NOTE
• This adjustment is to be made when a tilted image occurs.
18
1. Prepare the test chart that comes
with the ADF (option).
4035D513AA
2. Load the test chart in the ADF and
make five 1-sided copies.
NOTE
• Load the test chart lengthwise.
4035D512AA
3. Align each copy sample as shown on
the left and check the deviation.
If the deviation falls outside the
range specified below, perform the
following steps to make an adjust-
ment.
Specifications
0 ± 3.0 mm
4688U001AB
4. Loosen one screw.
4688U030AB
Field Service Ver. 1.0 Apr. 2005