Recording Function - TrekStor Luna S2 PVR Operating Instructions Manual

You will be able to save the channel list and afterwards leave the channel list editor by
pressing the D button.
• Moving a channel
Press the red button of the remote control. A symbol next to the name of the marked
channel is displayed and you will be able to move the channel to its new position by
using the buttons K, L, M and N. A new push onto the red button finishes moving the
channels within the list and the channel remains on its current position.
• Mark a channel for skipping
With this function, you will be able to skip a marked channel, which means, the channel
will not be displayed any more when changing the channels with K or L.The channel
will only be displayed after entering the channel number or after directly choosing it
within the channel list. You can mark a channel for skipping by pressing the green button.
• locking a channels
Press the yellow button, in order to lock the marked the channel. When you switch to a
locked channel, you will be asked to enter your password.
After entering the password, the channel will be unlocked until switching off the SatReceiver!
i
• Deleting a channel
Press the blue button, in order to delete the channel out of the channel list. You will be
asked to confirm your choice by pressing the k button.
• adding a channel to the favorite list
Press the B button, in order to add the channel to one of the favorite lists ("m
"N ", "S " or "m
ewS Port
menu appears, out of which you can add or delete a marked channel to/from a favorite
list. In case you are choosing "S
lists. You can leave the favorite lists by pressing the D button.

4.4) Recording function

In order to record a program a USB storage device (hard disk or USB stick) has to be connected
i
to your SatReceiver.
start/end a manual recording
• To start recording the desired program manually, press the 4 button.
• If you press the 4 button once more you will see on the left top of the screen how long
the recording is already running.
• In order to stop recording again, press the the stop button (µ ) or the 4 button for a
third time within 5 seconds. A window opens and you will be requested to confirm your
choice by pressing k button.
set automatic recording
• Search via the electronic program guide (EPG) the program, which you would like to
record and confirm your choice with the k button. Now move to the last point "m
the next window.
• "c r
hooSe there ecorD
• The SatReceiver then switches at the assigned time automatically to recording respective
switches off again.
EN 28
") or to delete it from a favorite list. After pressing B or k a
uSic
o
witch FF
" and confirm by pressing the k button.
" the channel will be deleted out of all favorite
",
ovieS
" of
oDe