Table of Contents
Advertisement
'Board list'.
③ Select the board at the 'Board list' and click 'web page Upload' button.
☞ Before uploading through Ethernet, the network information should be set for correct
network communication. By using PING test, it is possible to check if the value is appropriate
for network communication.
④ As below dialog box is shown, select the Flash Rom File System (*.rom) file and click 'OPEN'
button.
☞ The Flash Rom File System should be created by using "Rom File Maker Tool rev3.0". For the
detail, refer to "4.1.4. Use of Rom File Maker rev3.0"
⑤ If the file is uploaded, 'Complete Uploading' message is displayed.
4.1.4. Use of Rom File Maker rev3.0
Rom File Maker rev3.0 is the tool for creating ROM Image which enables the webpage to be
stored in the Flash memory.
Select the webpage by using 'Add Files' button.
☞ There is limitation of file number in selecting at a time. (Normally, max 15 files can be selected
simultaneously). If there are more files, use "Add Files" button for the several times.
© Copyright 2007 WIZnet Co., Ltd. All rights reserved
WIZ-Embedded WebServer User's Manual
Figure 16. Flash Rom Image File
20
TOP
W
I
Z
8
W
I
Z
8
1
0
M
1
0
M
J
J
D
D
a
a
t
t
a
a
s
h
e
e
s
h
e
e
t
t
Advertisement
Table of Contents
