Step B: Add A Url Gauge - M86 Security HL Installation Manual

In the Threat Analysis Reporter User Guide index, see:
• How to: access the Add/Edit Gauges panel

Step B: Add a URL Gauge

1. Click New Gauge at the bottom left of the panel to open the URL Gauge panel:
2. In the Gauge Information frame to the left, specify the following information as
necessary:
a. Gauge Name you wish to use and display for this gauge; this entry must be
at least two characters in length.
b. Group Threshold for the ceiling of gauge activity. For this exercise we will
use the default and recommended value, which is 200 for a URL gauge.
c. Timespan (minutes) for tracking gauge activity (1 - 60 minutes). For this
exercise we will use the default and recommended value, which is 15
minutes.
d. Gauge Method to be used for tracking gauge activity. For this exercise we
will use the default "All" gauge method, so you do not need to make any
selection from the drop-down menu. The selected "All" method considers all
methods users can use to access URLs in library categories included in the
gauge.
3. In the Available Threats/Groups list to the right, select one Threat Class/Group,
or up to 15 library categories by clicking each one while pressing the Ctrl key on
your keyboard. When you have made your selection(s) for the gauge to monitor,
click the add > button to move the choice(s) to the Assigned Threats/Groups list
box.
4. Click the User Membership accordion to open it and to display a list of Available
User Groups in the list to the left:
M86 S I G
ECURITY NSTALLATION UIDE
B U P T
EST SAGE RACTICES HREAT
A R U
NALYSIS EPORTER SAGE
S
CENARIOS
69