Advertisement
Quick Links
Advertisement
Related Manuals for Inalsa PSG1
Summary of Contents for Inalsa PSG1
- Page 1 INSTANT WATER HEATER PSG1/MSG1/ PSG3 Instruction Manual...
- Page 2 Your INALSA Instant Water Heater has a lot of thoughtful features built in to make your working convenient. Please read these instructions carefully, so that you may get the best out of the power packed features in your INALSA Instant Water Heater.
-
Page 3: Parts Identification
Parts Identification PSG3 MSG1 PSG1 Part No. Parts Name Outer body Indicator lamp (Power) Indicator lamp (Cutout) Water inlet (Blue) Water outlet (Red) Technical Specifications* Model No. MSG 1 PSG1 PSG3 Capacity (in l) Wattage (in kW) Power supply 230V, 50Hz, AC, Single Phase Max. -
Page 4: Important Instructions
Features 1. High grade stainless steel tank 2. Long life copper tube heating element 3. Thermostat & thermal cut out for safety 4. Fusible plug & BPRVfor total safety Important Instructions Please read operating instructions before using the appliance to ensure safe and reliable performance. -
Page 5: Installation Positions
Installation Positions Mounting Dimensions Model Pipe Connection (mm) MSG1 140mm 12mm (½”) PSG1 65mm 175mm 12mm (1/2”) PSG3 80 mm 195 mm 12mm (½”) Water supply 1. You can connect the water heater directly to the overhead water supply tank. Do not connect the water heater directly to water lifting pumps. -
Page 6: Safety Devices
3. Now close the gate valve at the outlet. Always keep the inlet valve open. 4. Switch ON the power supply. Red neon lamps will glow 'ON' to indicate that power is ON and water is getting heated. 5. Switch OFF the power supply when the unit is not in use. Safety Devices Thermostat An adjustable bimetallic stem type snap action thermostat with temperature...