Table of Contents
Advertisement
/
/
/
/
/
3.3 Main Menu
Right-click anywhere on the screen to show the main menu as follows, and right-click
again to exit.
For details about the menu structure, please refer to "APPENDIX 4 MAIN MENU
STRUCTURE" at page 50.
Main Menu
Camera Menu
Enter
/
Up / Down / Left /
Right
Zoom in / out max
Zoom in / out
Focus near / far
Auto mode
Preset point
GUI DISPLAY WITH USB MOUSE CONTROL
Click to enter the camera main menu.
For details about each camera menu, please refer to its
own user manual.
Click to confirm your selection / enter the menu.
Click to move your selection up / down / left / right, or
change settings.
Click to zoom in on the image to the largest / zoom out
on the image to its original size.
Click to zoom in / out the image.
Click to adjust the focus of the image.
Click to activate the auto function.
Before using it, you need to assign a specific function
that will be enabled when "AUTO" is clicked. For
details, please refer to the user manual of the PTZ
camera.
Click to enter the PTZ preset point you want to see.
Click to set the status display, image
QUICK START
settings, and date & time.
Click to set the date display and
DATE SETUP
daylight saving.
SYSTEM
Click to set the system configurations.
EVENT
Click to enter the event search menu.
INFORMATION
Click to set CAMERA, DETECTION,
ADVANCE
ALERT, NETWORK, SNTP, DISPLAY,
CONFIG
RECORD and REMOTE.
SCHEDULE
Click to set record timer and detection
SETTING
timer.
14
Advertisement
Table of Contents
