Safety Precautions; Warranty - PEP CL Series Operating & Maintenance Manual

CL Series Filter System
Operating & Maintenance Manual

Safety Precautions

All electrical, mechanical and rotating machinery constitute a potential hazard,
particularly for those not familiar with its design, construction, and operation.
Accordingly, adequate safeguards should be taken whenever working with or near CL
filter systems.
Equipment, operation, maintenance, and repair should be undertaken by qualified
personnel only. All such personnel should be thoroughly familiar with the
equipment, the associated system and controls, and the procedures set forth in this
manual. Proper care, procedures, and tools must be used in handling, lifting,
installing, operating, maintaining, and repairing the CL filter system.
For the protection of authorized service and maintenance personnel, the pump motor
associated with this equipment should be installed with a lockable disconnect switch
located in close proximity and within sight of the CL filter. No service work should be
performed on or near the pump motor without first ensuring that the pump motor
has been electrically disconnected and locked out.
The re-circulating water system may contain chemicals or biological contaminants
that could be harmful if inhaled or ingested. Accordingly, personnel exposed to the
mist produced by water jets or compressed air (should these be used to clean
portions or components of the CL filter) should wear half-face respirators with HEPA
filter cartridges, NIOSH/MSHA approved number TC-21C-142/TC-21C-182.
Warranty Policy
All products manufactured by PEP are warranted to be free from defects in materials
and workmanship for a period of 12 months from date of startup or 18 months after
shipment, whichever is sooner. Contact PEP Filters for further warranty information.
PEP Filters • 322 Rolling Hill Road • Mooresville, NC 28117 • 800-243-4583 • www.pepfilters.com
12 of 17
Rev. 030702