Advertisement
Your Super-Vee is designed to give
you
years
of
trouble-free,
service. However, no machine is better
than its operator.
Read, understand and follow all safety
warnings and instructions provided with
the product. Failure to follow the warnings
and instructions may result in electric
shock and/or serious injury. Save all warn-
ings and instructions for future reference.
SAVE THESE INSTRUCTIONS!
Super-Vee
Operating Instructions
For 1-1/4‖ through 3‖ lines
(30mm—100mm)
profitable
™
Pour français voir la page 7
Para ver el español vea la paginá 15
Advertisement
Table of Contents
Related Manuals for General Pipe Cleaners Super-Vee
Summary of Contents for General Pipe Cleaners Super-Vee
- Page 1 Operating Instructions For 1-1/4‖ through 3‖ lines (30mm—100mm) Pour français voir la page 7 Para ver el español vea la paginá 15 Your Super-Vee is designed to give years trouble-free, profitable service. However, no machine is better than its operator.
-
Page 2: General Safety Rules
These items could become procedures for the Super-Vee. wrapped around the cable and cause serious injury. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety mes-... -
Page 3: Work Area
Super-Vee™ drugs, alcohol, or medication. A moment of inat- GENERAL SAFETY RULES tention while operating power tools may result in seri- Work Area ous personal injury. 1. Keep work area clean and well lit. Cluttered 2. Dress properly. Do not wear loose clothing or benches and dark areas invite accidents. -
Page 4: Specific Safety Rules
Cable grounding prong on the plug is still in place. 3. The drive unit used in the Super-Vee is double Grip Shield insulated, and therefore has no grounding wire. -
Page 5: Operating Instructions
Attachment 9. Slide the grip shield forward to release the cable. Pull the Super-Vee back while holding the able in place. After you are past the first bend, you probably Operating Instructions will not have to hold the cable as you pull the ma- chine back. -
Page 6: Maintenance
TO CLEAN OR REPLACE GRIPPERS 5. Press replacement cartridge firmly into back of con- If your Super-Vee is not gripping the cable properly, the tainer. Make sure to line up the grooves in the car- cable grippers may need to be cleaned or replaced.
Need help?
Do you have a question about the Super-Vee and is the answer not in the manual?
Questions and answers