NetModule NetBox NB1310 User Manual page 63

3.1.8.3.3 Factory reset
Press [Reset] to set the device to factory default. Your current configuration will be lost.
This action can also be initiated by pressing and holding the Reset button for at least five seconds.
The factory reset will also set the IP address of the Ethernet interface to 192.168.1.1. You will be able to
communicate again with the device using the default network parameters.
3.1.8.4 Troubleshooting
3.1.8.4.1 Mobile Connection Debugging
User Manual NetBox Wireless Router
4-Jan-10
manual_netbox_e
63/99