Download Print this page

Lennox Hearth Products PI40-32ZCFK Installation Instructions page 2

Country collection 32” zc surround kit for use with the winslow pi40 pellet fireplace insert

Advertisement

Notes:
Level the insert per instructions on Page 10 of the Installation and
Operation Manual.
See Page 7 of the Installation and Operation Manual for information
on hearth extension requirements.
Side Door Removal
See Figure 4
1. Swing door open
2. Lift door up, and
3. Pull bottom of the door out and down - pulling the top hinge pin out
of the retaining hole in the top hinge bracket.
To reinstall the door, slide the pin on the top of the door up and into
the hole in the upper hinge bracket. Slide the pin on the bottom of the
door into the hole in the pedestal base and rotate the door closed.
Figure 3
Lennox Hearth Products reserves the right to make changes at any time, without notice, in
design, materials, specifications, prices and also to discontinue colors, styles and products.
Consult your local distributor for fireplace code information.
Printed in U.S.a. © 2008 Lennox Hearth Products
P/N 506033-05 REV. NC 08/2008
2
11"
21-1/2"
138°
6-11/16"
NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.
2
Side
Door
1
3
Figure 4
FIREPLACE OPENING C/L
32" FIREPLACE OPENING
13-1/2"
41" SURROUND WIDTH
HEARTH/FLOOR PROTECTION
31-3/4"
18-3/8"
18"
CONTROL
BOARD
SURROUND
7-7/16"
1110 West taft avenue • Orange, Ca 92865
3"
DEEP

Advertisement

loading