Table of Contents
Advertisement
Follow the steps below for mount the switch onto the track.
1. Insert the top of DIN-Rail plate into the track.
2. Lightly push the DIN-Rail plate into the track.
3. Check if the DIN-Rail is tightened on the track or not.
4. To remove the switch from the track, reverse steps above.
2-4.1.2 Wall Mounting
Follow the steps below for wall-mounting installation.
1.
Remove the DIN-Rail plate from the switch; loosen the screws to remove the DIN-Rail plate.
2.
Place the 2 wall mounting plates on the top and bottom panel of the switch respectively.
3.
Use the screws to screw the wall mounting plates on the switch.
4.
Use the hook holes at the corners of the wall mounting plates to place the switch on the wall.
5.
To remove the wall mounting plates, reverse the steps above.
2-4
Hardware Installations
Advertisement
Table of Contents
