Place Calls To A Telephone Outside The Network - Cisco ATA 186 Configuration Manual

PLACE CALLS TO A TELEPHONE OUTSIDE THE NETWORK

To place a call to a telephone outside the CafeFone network:
1. Pick up the handset of the phone connected to the ATA, and confirm that there is a dial tone.
2. Dial the phone number you would like to call. Press the pound key (#) to send the call immediately.
Otherwise, the call will be sent in four seconds.
TYPE OF CALL
Domestic calls (within the US)
International calls (placed from the US)
Calling from outside the US to the US
Calling from outside the US
3. When the call is complete, place the phone's handset back on the phone to hang up.
4. If you would like to make another call, pick up the handset of the phone connected to the ATA, and
repeat steps 1 through 3.
CafeFone Configuration Guide for the Cisco ATA186
DIAL PATTERN
1 + area code + 7-digit telephone number
011 + country code + city code + telephone number
1 + area code + 7-digit telephone number
011 + country code + city code + telephone number
Page 6