Advertisement
Quick Links
011209-2
DigiSender
MODEL: DX200-LCDRX
Plug'n'Go™ LCD
Accessory Receiver
IMPORTANT: ALWAYS KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
®
WATCH A VIDEO
WATCH A VIDEO
INSTALLATION
INSTALLATION
& TROUBLESHOOTING GUIDE
& TROUBLESHOOTING GUIDE
Available online at: www.aei.eu/video
Available online at: www.aei.eu/video
Advertisement
Summary of Contents for DigiSender Plug’n’Go DX200-LCDRX
- Page 1 011209-2 DigiSender MODEL: DX200-LCDRX ® Plug’n’Go™ LCD Accessory Receiver WATCH A VIDEO WATCH A VIDEO INSTALLATION INSTALLATION & TROUBLESHOOTING GUIDE & TROUBLESHOOTING GUIDE Available online at: www.aei.eu/video Available online at: www.aei.eu/video IMPORTANT: ALWAYS KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE...
- Page 2 Transmitter and output them to a connected TV. Locate a vacant SCART socket on the back of your Connect the Receiver into a Mains Extension receiving TV and insert the DigiSender® SCART Lead. The positioning of the Receiver can affect cable.
- Page 3 On the receiving TV, select the SCART channel Freeview, DVD, VCR, etc.). assigned to the SCART socket that you plugged the DX200-LCDRX Receiver in to. This may be la- belled as SCART, AUX, AV, VIDEO, VCR or When controlling your Satellite, Cable or Free- view box, point the remote control at the IR Sen- sor in the receiving location.
-
Page 4: Advanced Functions
DigiSender® Plug’n’Go™ LCD operates. Because the Audio/Video Channel switch allows you to ‘fine tune’ the frequency on which your DigiSender® Plug’n’Go™ LCD operates, it is possible to overcome most interference and reception troubles that may occur. -
Page 5: Troubleshooting Guide
2. Ensure the IR Emitter is facing the IR Sensor on your source equipment. 3. Move the IR Emitter further away from the source equipment. 4. Move the DigiSender® Plug’n’Go™ LCD Transmitter AND Receiver further away from other electrical devices. -
Page 6: Technical Support
DX200-LCDRX - DigiSender® Plug’n’Go™ LCD Technical Support AEI Security & Communications Ltd is dedicated to providing our customers with first class customer care and technical support. During busy periods we would suggest using the web option to obtain support. 1. On the web... - Page 8 AEI Security & Communications Ltd Weslake Industrial Park Rye Harbour Road, Rye East Sussex TN31 7TE United Kingdom Plug’n’Go and DigiConnector are trademarks of AEI Security & Communications Ltd. DigiSender is a registered trademark of AEI Security & Communications Ltd.