Table of Contents
Advertisement
Available languages
Available languages
S e t t i n g s
USB data cable
You can use the USB data cable to transfer data between the memory card inserted
in the phone and a compatible PC or a printer supporting PictBridge. You can also
use the USB data cable with Nokia PC Suite.
To activate the memory card for data transfer or picture printing, connect the data
cable; when the phone displays
and one of the following options:
Default mode
— to use the cable for Nokia PC Suite
Printing
— to print pictures directly from the phone using a compatible printer.
Data storage
— to activate the memory card for data transfer
To change the USB mode, select
cable
>
Default
mode, Printing, or
■ Call
Select
Menu
>
Settings
Call forwarding
— to forward your incoming calls (network service).
Call forwarding and call restrictions cannot be active at the same time.
See
Call restrictions
Anykey answer
>
On
except the left and right selection keys, volume key, camera key, or the end key.
Answer when fold is opened
open the fold. If the setting is off, you must press the call key after you open the fold.
Automatic redial
>
to connect the call after an unsuccessful call attempt.
1-touch dialing
>
On
1-touch dialing keys, 2 to 9. To dial, press and hold the corresponding number key.
Call waiting
>
Activate
while you have a call in progress (network service). See "Call waiting," p. 21.
Summary after call
(network service) of the call after each call.
Send my caller ID
>
calling (network service). To use the setting agreed upon with your service
provider, select
Set by
46
USB data cable connected. Select
Menu
>
Data
>
Call
and one of following options:
in "Security," p. 49.
— to answer an incoming call by briefly pressing any key,
>
On
— to set your phone to answer a call when you
On
— to set your phone to make a maximum of 10 attempts
and the names and phone numbers assigned to the
— to set the network to notify you of an incoming call
>
On
— to briefly display the approximate duration and cost
Yes
— to show your phone number to the person you are
network.
Settings
>
Connectivity
storage.
mode., select
OK
>
USB data
Advertisement
Chapters
Table of Contents
