Advertisement
- Auto 2:
Working week with three meals per day and the weekend, starting breakfast two hours
later.
Day
Start
Monday
6:30
Tuesday
6:30
Wednesday
6:30
Thursday
6:30
Friday
6:30
Saturday
8:30
Sunday
8:30
- Manu:
This mode enables the user to choose all the possible programming modes, limited to
three programmes per day (T1-T2-T3).
Once this mode has been selected, adjust your programming determining the day (Day 1
to Day 7) and the number of times it blows at maximum power per day (from 0 to 3).
All movements and changes are done using keys 19 and 20, and the validation with key18.
All
t
For operation using only «Boost cuisine». Simply validate the Manu mode (without carrying
out hour adjustments).
•
Activating the By-pass (6):
The by-pass works automatically, with this conditions:
- Indoor temperature > Outdoor temperature and Indoor temperature > 24ºC ,
p
But if you wish, you can force it manually for 8 hours.
Navigate with keys 19 and 20 to pictogram 6 showing the By-pass.
Select with key 18. Select ON using keys 19 or 20. Validate with key 18. You can disable
the forced by-pass mode at any time. To do this, Navigate with keys 19 or 20 to pictogram
6 showing the By-pass.
Select with key 18 Select OFF using keys 19 or 20 Validate with key 18
Select with key 18. Select OFF using keys 19 or 20. Validate with key 18.
•
Activating the absence mode (8):
In case of a prolonged absence, you have the possibility to diminish the fresh air flow. To
do this, navigate with keys 19 or 20 to pictogram 7 showing absence mode.
Select with key 18. The pictogram will flash. Validate with key 18.
•
Viewing savings (14):
The IDEO-HR enables you to view monthly savings from heat recovery in kilowatts at any
time.
Press key 17 continuously to view savings.
•
Remote control transmission/reception level (9):
The remote control communicates permanently with the IDEO 275 Ecowatt. The
The remote control communicates permanently with the IDEO 275 Ecowatt The
transmission/reception level will enable you to know the quality of this signal.
If this is zero, you have the possibility of changing to a more powerful module.
Transmission level with a standard antenna: 150 metres in an open space
Transmission level with an optional antenna: 200 metres in an open space
•
Temperature readings (15 and 16):
Temperatures Tin and Tout indicate the temperatures measured in:
T1
Finish
7:30
7:30
7:30
7:30
7:30
9:30
9:30
d h
d
- Tin: Temperature on the remote control.
- Tout: Temperature into the outdoor fresh air inlet.
T2
Start
Finish
12:00
13:00
12:00
13:00
12:00
13:00
12:00
13:00
12:00
13:00
12:00
13:00
12:00
13:00
i
k
19
d 20
p
T3
Start
Finish
19:30
20:30
19:30
20:30
19:30
20:30
19:30
20:30
19:30
20:30
19:30
20:30
19:30
20:30
d th
lid ti
ith k 18
p
,
Advertisement
