Table of Contents
Advertisement
3.4.5
Modify Parameters in Printing
This operation is used to offset the position of
printed images in printing.
You can adjust any parameters on this page and
use the 'Update' button to modify parameters
online.
When you click the 'Update' button, the
TeckwinPrint dialog appears to verify that you really want to modify the online parameters.
If you click the left button, it updates the online parameters at the next pass. Click the right
button if you do not want to update the online parameters.
3.4.6 Operation Introduction
3.4.6.1
Printing Document
Two options:
1. Choose the RIP file. Click the Open File button on the Toolbar to open the file. Now
that the Start Print button is active, just click it to begin printing. The print parameters
should be the same as last time. (Use default values for the first time printing).
2. Use the browse button on the operation panel to choose an RIP files folder.
When you select the folder and click the 'OK' button, it displays all the image files in that
RIP folder on the bar of image list in main interface. Then you can select the image file
to print.
3.4.6.2
Select Print Parameters
Print Mode: The mode for printing: 3 pass , Draft, Normal, Enhanced, Master and Ultra.
The ink quantity control 3, 4, 6, 8, 12, and 16 pass.
Print Speed:
The speed of print head in printing can be modified online.
Print Color Bar: If it is selected, six color bars with colors of C, M, Y, K, LC, and LM will be
printed on the blank margin of printed image.
The Print Color Bar can also prevent the nozzle from being clogged. If the printed image
only displays part of six colors, the Print Color Bar can greatly improve printing quality.
Matan JetSet 3.2P Printer
38
User Manual
Advertisement
Table of Contents
