Honda CBX250 Twister Owner's Manual page 92

Table of Contents

Advertisement

Available languages

Available languages

Owner´s Manual
Initial Display
When the ignition switch is turned ON, the display will
temporarily show all the modes and digital segments
so you can make sure the liquid crystal display is
functioning properly.
Both digital clock and tripmeter will reset if the battery
is disconnected.
(1)
(2)
(3)
(4)
(1) Digital clock
(2) Odometer
(3) Tripmeter
(4) Fuel gauge
Digital Clock
Shows hour and minute. To adjust the time, proceed as
follows:
1. Turn the ignition switch ON.
2. Press and hold both the HOUR (1) and MINUTE (2)
button for more than 2 seconds. The clock will be
set in the adjust mode with the display flashing.
3. To set the hour, press and release the HOUR button
until the desired hour and AM/PM setting are
displayed.
• The time is advanced by one hour, each time the
button is pushed.
• The time advances fast when the button is pushed
and held.
4. To set the minute, press and release the MINUTE
button until the desired minute is displayed.
The minute display will return to "00" when "60" is
reached without affecting the hour display.
• The time is advanced by one minute, each time
the button is pushed.
• The time advances fast when the button is pushed
and held.
5. To end the adjustment, press the RESET (3) button
or turn the ignition switch OFF.
The clock will be reset AM 1:00 if the battery is
disconnected.
19

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents