Page 1
RAD-60 USER GUIDE (ALSO FOR THE RAD-50 MODEL AND ISOTRAK DOSIMETERS)
Page 2
RAD-60 DOSIMETER USER’S GUIDE The RAD-60 is a Digital Pocket Alarm Stand Alone Dosimeter designed for use by people who may be exposed to gamma and X-ray radiation during their work. It provides programmable dose rate and dose alarms. RAD-60 is microprocessor controlled and is operated using the display and the push button.
Page 3
Switch off (OFF) Press push button shortly until -Display changes to OFF. Press push button until a bleep occurs. -The display goes blank. Chirp on/off (CHr) Press push button shortly until -Display changes to CHr. Press push button until a bleep occurs. -The chirp is activated/deactivated.
Page 4
Show dose rate alarm level (drA) Press push button shortly until -Display changes to drA. Press push button until a bleep occurs. -Current alarm level is displayed. Wait for return to dose/dose rate display. Change dose rate alarm level (drA) There are 6 different levels for dose rate alarm: 10 µSv/h, 100 µSv/h, 1 mSv/h, 10 mSv/h,...
Page 5
Dose alarm or Dose rate alarm (Blinking display) The dose/dose rate display is blinking and the continuos audible alarm is on. The dose alarm can be reset by pressing the push button. The display changes to previously selected mode. Audible alarms Dose rate: - - - - (4 bleeps each second) Dose: __...
Page 6
5 µSv/h - 3 Sv/h 0.5 mrem/h - 300 rem/h Measurement accuracy: Contact: better than ±5% (Cs-137, 662 keV) LAURUS Systems, Inc. Energy response: Attn: Laura Lynch 60 keV - 3 MeV, better than ±25% 8779 Autumn Hill Drive...
Need help?
Do you have a question about the Rad-50 and is the answer not in the manual?
Questions and answers