Recording A 3D Video - LG Thrill 4G User Manual

3D Video Camera Viewfinder
Brightness – This defines and controls of the amount of sunlight entering the lens. Slide
3D Focus – You can manually fine-tune the 3D focus by adjusting the amount of
overlapping.
Camera Switch - Allows you to switch between the front and back cameras.
Settings – Tap this icon to open the settings menu. The options are similar to the 2D
camera with the addition of 3D focus mode.
3D focus mode – Select the auto 3D focus option from Border and Center.
Border uses a border area for optimizing the amount of overlapping. Center
uses a center area for it. You can also find-tune manually with the 3D focus
function on the viewfinder.
Video size – Tap to set the size (in pixels) of the 3D video you will record. Set
your 3D video image size as HD (1280x720), D1 (720x480) or VGA (640x480).
Flash – Allows you turn on the flash when recording video in a dark place.

Recording a 3D video

1 Open the 3D Camera application and slide the Mode Switch to the right to change to the
Video mode. The Capture Button
2 The Video camera viewfinder will appear on the screen.
3 Holding the phone horizontally, point the lens towards the subject of the video.
4 Tap the Record Button
viewfinder.
5 Tap the Stop Button
the brightness indicator along the bar, towards "-" for a lower brightness
image or towards "+" for a higher brightness video.
will change to
. The duration of the recording will appear at the bottom of the
to stop recording.
3D Camera
.
49