Language
Refer to page 10 and 11 for details about language selection.
Light
The Configuration > light option allows you to adjust the brightness of
the light. You can also shift the light mode by pressing the light button on
the remote control. Three modes are available:
Power Saving: Select to turn down the light.
Turn On: Select to turn on the light.
Sleep Timer
The Configuration > Sleep Timer option allows you to select a preset amount of
time after which the device shuts off. You can also set the sleep timer by pressing
the Sleep button on the remote control. When this function is activated, the XXX
icon will appear at the upper right corner of the display, XXX signifying the minutes
left. Six options are available: Turn Off, 15Minutes, 30Minutes,
60Minutes, 90Minutes and 120Minutes.
Buffering
The Configuration > Buffering option allows you to set the buffer to hold data
received for a certain amount of time. If you are connecting to a station, there
will be an icon signifying the buffer length you set (see the figure on page 18):
•
2Seconds:
•
4Seconds:
•
8Seconds:
22