Ptz Control; Zoom; Focus; Iris - Yunso 80XX Series H.264 User Manual

80XX Series H.264 Digital Video Recorder User Manual ..........................................................V1.0

4.4.2 PTZ CONTROL

Change the focus, preset aperture to control the PTZ.
Click
the one direction key, the PTZ will keep circling as that direction after user press the stop
key in the center of the wheel.

4.4.3 ZOOM

Click

4.4.4 Focus

Click

4.4.5 Iris

Click

4.4.6 PTZ PRESET

You can control it via the below three buttons:

4.4.7 PLAY

Move cursor to the icons, it will highlighted when selected
Open all video
Capture picture, save in local disk, system save default route is C:/DVR
Quickly start all channels' recording video, here the left up corner of each channel
have normal recording video symbol 【R】, click icon to switch between signal
screen /quad /nine
to up/down/left/right control movement of the PTZ. When hold on
to zoom in and out.
to focus
to change the size of aperture
Setup preset point.
/16 split
Volume adjust button
.
36