Device Operation Manual; Remote Key Instruction; Remote Control - Yunso 80XX Series H.264 User Manual

80XX Series H.264 Digital Video Recorder User Manual ..........................................................V1.0

3. Device operation manual

In device operation, the enter key on remote control has the same function with
mouse left click.

3.1 Remote key instruction

3.1.1 Remote control

【FWD】 : Fast forward the video while playback. press 【PLAY】 to return to normal speed；
【REV】 : Reverse the video while playback, press REW to switch, press 【PLAY】 to return
to normal speed；
【POWER ON】: Reset the MDVR to Power on and Power off mode. (standby and start
up)；
【LOGIN/LOCK】: If the security is enabled in the setup, use LOGIN/LOCK key to enter
the user setup. It is important to remember the password due to without restoration
function. Log in（to enter into "User ID select" and "Password" input interface）and lock
functions（To exit setup and operation）
【OSD】: Press OSD for main menu；
【PTZ】: PTZ control，press this key to enter into PTZ control interface when at single live
view；
【EXIT】: Exit to the preview or return to the last menu；
Handheld IR Controller Key Functions:
【0－9】keys: During setup, number keys are used to input
values. For viewing channels 1, 2, 3 and 4, use 1, 2, 3 and 4 on
numeric keypad respectively.
【＋】 , 【－】 keys: During setup, plus and minus are used to select
next or previous values.
， : Up, Down directional keys: Move selection up and down
in setup menu.
， : Left, Right directional keys: Move cusor left or right in
setup menu.
【QUAD】: Switch 4 Channels；
10