Rear Panel - AMC Power Box 5R User Manual

Rear Panel

1. RCA INPUT
Stereo RCA connector for line level audio.
2. POWER CONNECTOR
The connector is used to connect the AC
power source to active loudspeaker.
3. SPEAKER OUTPUT
This output is designed to connect the
passive Power Box 5R loudspeaker. The
minimum load impedance - 4Ω. Please pay
attention to polarity during the wiring.
4. POWER SWITCH
Press the button for turning on/off main
power.
5. VOLUME
Master volume control for adjust the
sound level.
6. TREBLE
This control allows adjusting high tones
of sound. Push both + and – buttons
simultaneously to reset the tone control to
neutral position.
7. BASS
This control allows adjusting low tones of
sound. Push both + and – buttons
simultaneously to reset the tone control to
neutral position.
8. POWER INDICATOR
This LED indicates if loudspeaker is
turned on.
9. FUSE HOLDER
Use only T1AL 250V fuse. Contact with
qualified service personnel if fuse blows up
constantly.