Lenovo LXM-WL19CH Service Manual page 7

19" LCD Color Monitor
PANEL CONTROL
Power: Press this knob to switch ON/OFF of monitor's power.
MENU/ENTER: Activate OSD menu or function adjusts confirmation.
LENOVO Multi-Hue Function Hot Key: Go into Multi-Hue mode.
Brightness : Adjust brightness or function adjustment.
Auto Config Key / EXIT:
1. When OSD menu is in active status, this knob will act as EXIT-KEY(EXIT OSD menu).
2. When OSD menu is in off status, press this knob over 1 seconds to be in Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus automatically.
Power indicator :
Blue — Power On mode.
Orange — Power Off mode.
NOTES
•Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to
direct sunlight, or excessive dust or mechanical vibration or shock.
•Save the original shipping carton and packing materials, as they will come
in handy if you ever have to ship your monitor.
• For maximum protection, repackage your monitor as it was originally packed at the factory.
• To keep the LCD clean, periodically clean it with a soft cloth. Any kind of liquids will damage the LCD.
• To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a
cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or
abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before
cleaning it.
7
Lenovo LXM-WL19CH