Download Print this page

10-8 Video Digital Evidence Solutions 2.4GHZ Wireless Microphone Syste Installation page 3

2.4ghz wireless microphone system

Advertisement

If your department opted for our new 2.4ghz wireless microphone system,
congratulations. This is an incredible wireless microphone with excellent
range and clarity. The operation is easy and straight forward.
As long as there is power to the cradle/receiver, and the transmitter is
inserted properly in the cradle, the transmitter will charge and stay
charged. In addition, inserting the transmitter into the cradle will synch the frequency and
channel between the transmitter and receiver. When the 'green' LED light is solid, the
battery is charged.
On the bottom of the transmitter is a small switch; slide it to the on position. Now insert
the transmitter into the cradle to allow the units to synch. The 'Talk' light will flash
briefly and the transmitter is then ready for use. The red 'Talk' button is what will switch
the unit between stand-by and actively transmitting. If your receiver was installed with
the transmit sensor connected to the DVR, then activating the transmitter with the 'talk'
button will also activate the recorder to begin recording. Pressing the button again will
put the transmitter in stand-by and turn the recorder off. The exception to this would be if
the recorder was already activated by your emergency equipment. In this case, the
recorder would continue to record but your mic transmitter would be in stand-by and not
transmitting audio to the recorder.
The Mode button cycles through 3 modes: silent, vibrate & audio warning, and vibrate
only. This is for instances when your Mic is out of range to the receiver or has not been
properly synched to the receiver.
This unit has a built in microphone in the transmitter. For most situations, this is the only
microphone you will need. However, the unit is also supplied with a wired lapel
microphone. Should this mic be needed, simple plug the microphone into the top of the
transmitter. This will de-activate the built in mic and audio will only be picked up by the
wired mic.
Thanks for you support. Be Safe out there....
ADDENDUM: User's Guide:
2.4GHZ Wireless Microphone System (Optional)

Advertisement

loading

This manual is also suitable for:

2.4ghz wireless microphone system