Advertisement
If you hooked up the brown trigger lead to the DVR for remote activation, there is 1
setting that needs changed in the DVR:
Power on the system.
Using the remote, press the 'Menu' key. Use the arrow keys to moved down the menu to
the 'Peripheral' section. When highlighted, press the enter key to get to the next menu.
Scroll down and select 'Alarm Setup'.
On the next screen in the 'Alarm 1' row, change the Status from NO to NC.
Don't make any other changes and press the 'Menu' key until there are no more menus on
the screen. Now power down the system for a few seconds and restart.
You new wireless mic is now ready to use. It has excellent range and battery life. Now
read over the short user guide on the next page and you are all set.
Advertisement
