Voice Commands - Nokia N80 User Manual

Cell info display—Select On
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.
Enhancement
In the standby mode, indicates a compatible headset
is connected, and that the headset is unavailable, or a
Bluetooth connection connectivity to a headset is lost.
indicates a compatible loopset is connected and
a Text phone is connected.
Select Headset, Loopset, Text
handsfree, or Music stand
Default profile—Set the profile that you want activated
each time you connect a certain compatible enhancement
to your device. See "Profiles—set
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
ringing type is set to Beep once
answer is disabled. Automatic answer is not available for
Text phone.
Lights—Set whether lights remain on, or are switched off
after the time-out. This setting is not available for all
enhancements.
to set the device to indicate
that
phone, Bluetooth
and from the following:
tones", p. 93.
or Silent, automatic
Copyright © 2007 Nokia. All rights reserved.
If you are using a Text phone, you must activate it on your
device. Press , and select
Enhancement > Text phone

Voice commands

You can use voice commands to control your device.
For more information about the enhanced voice
commands supported by your device, see
p. 57.
To activate enhanced voice commands for starting
applications and profiles, you must open the
application and its Profiles
Tools > Voice cm. > Profiles; the device creates voice
tags for the applications and profiles. To use enhanced
voice commands, press and hold
and say a voice command. The voice command is the name
of the application or profile displayed in the list.
To add more applications to the list, select
application. To add a second voice command that can be
used to start the application, select
command, and enter the new voice command as text.
Avoid very short names, abbreviations, and acronyms.
To listen to the synthesized voice tag, select
Playback.
Tools > Settings >
> Use text phone > Yes.
"Voice dialing",
Voice cm.
folder. Press , and select
in the standby mode,
Options > New
Options > Change
Options >
107