Troubleshooting - Plasma Cool Plasma 14000 BTU Owner's Manual

Never try to repair or dismantle the air conditioner yourself. Tampering with the unit may
result in the loss of warranty and can endanger the user and property.
Problem
The Unit Does
Nothing
The Air Conditioner
Does Not Function
Properly
The Unit is Noisy
The Remote
Control Does Not
Function
If you have any questions regarding the operation of the Plasma Cool
To purchase Replacement Filters for this unit, contact Arbaco at
1-877-613-1800 and request model number PLASMA COOL PC14E
Please contact Arbaco for service or technical assistance

Troubleshooting

Cause
No power supply.
Is the LCD light is fl ashing?
Timer Function Set.
Windows or doors are
open.
The fi lter is dirty.
Air inlet or air outlet is
blocked.
Room temperature lower
than the selected value.
The overheat protection is
activated.
Unit is not standing on a
level surface.
Distance too great.
Remote control signal not
detected by control panel.
Batteries are dead.
please contact Arbaco at 1-877-613-1800
REPLACEMENT FILTERS:
If this product is defective or not working properly,
please DO NOT return to your retail store.
Arbaco Ltd.
www.plasmacoolstore.com
Make sure outlet works.
Be sure Green Light is on (L.C.D.I. Plug)
Press Re-start button.
Drain the Unit.
Deactivate the Timer Function.
Close doors and windows.
Clean or replace fi lter.
Remove blockage.
Lower temperature selected.
Wait 3 minutes until temperature has
decreased, then turn on again.
Place on an even surface.
Make sure the remote is aimed at
the control panel.
Control is aimed at the control panel.
Replace the batteries.
15
Solution